Quality Control

Uses

• ✔ Polypallets are used as dunnages beneath the stacks
• ✔ It is used to aerate the stocks
• ✔ To collect the spillages beneath the stack

Uses

• ✔ Polypallets are used as dunnages beneath the stacks
• ✔ It is used to aerate the stocks
• ✔ To collect the spillages beneath the stack

• ✔ It is used in the Godowns to stitch the mouth of the gunny bag with recommended colour twine.

• ✔ Goggle, Gloves and Mask are used during the disinfestation measures taken at the godown.
• ✔ It is worn during handling of chemicals at the godown points to prevent exposure to hazardous chemicals.

• ✔ It is used in godowns with huge storage capacity.
• ✔ It is used for spraying / air-charging chemicals to control infestation.

• ✔ It is used in the Regional Lab and godown to weigh the refraction of samples during analysis.

• ✔ Usage : Enamelled plates are used to analyse lab samples.

• ✔ Usage : Poker is used to draw samples from bags for quality checking.

• ✔ It is used in the Regional Lab to divide samples equally for analysis without variation in quantity.

• ✔ It is used to record whether the insects are in clear, few, or heavy stage.

• ✔ The adapter is inbuilt and works on mains or battery.
• ✔ Rotary selector switch and calibration switch should be provided at the battery compartment inside the machine (check the temperature and range voltages without opening the battery compartment).
• ✔ All ICs and relays should be fixed in the base only.
• ✔ The temperature sensor must be fitted with PT 100.
• ✔ The display should project 20° angle from the top panel, covered by transparent acrylic sheet, and % of moisture can be seen easily on the display.
• ✔ The Test Cup and Ratchet handle are made of stainless steel.
• ✔ Weight of the Universal Digital Moisture Meter should not be lower than 23 kgs.
• ✔ Specimen moisture meter as per specification should be submitted.
• ✔ Universal Digital Moisture Meter should conform to IS No.8824 Part I 1978 with up-to-date amendments.
• ✔ To collect the spillages beneath the stack.

• ✔ It is used to check the moisture content of all types of commodities.
• ✔ It is used in Direct Purchase Centre, CAP, MRM, and Godowns.

• ✔ Length – 3 feet
• ✔ Length – 3 feet

• ✔ It is used surrounding the B.P. Cover to make it airtight.
• ✔ Prevents leakage of gas during fumigation in godowns.

• ✔ Coverage up to 80 sqm
• ✔ Shipping Weight – 12 pounds
• ✔ UV tubes – Philips Actinic (2 tubes included)
• ✔ Power requirements – 240v AC
• ✔ Compliance – CE listed
• ✔ Robust construction
• ✔ Simple glue board technology
• ✔ Flexible and easy installation
• ✔ Easy cleaning and service
• ✔ Replacement UV tubes and glue boards are available separately
• ✔ Dimensions – 52 Cm x 38 Cm x 10 Cm

• ✔ It is used to trap the flying insects at night.
• ✔ Pollution free
• ✔ Chemical free
• ✔ Environment friendly
• ✔ Controls infestation

• ✔ It is used for spraying in the ratio 1:100.
• ✔ Spraying upon the stack and surface contact.
• ✔ It is sprayed fortnightly.

• ✔ Air charging is done with this chemical in ratio 1:150.
• ✔ It is done when flying insects are noticed.
• ✔ Air charging is done in alleyways, gangways, walls, and ceilings to control infestation.
• ✔ Weekly process.

• ✔ Available in tablet form, used during fumigation. Each tablet – 3 gms.
• ✔ Used in stacks along with paper cones.
• ✔ Per tonne – 3 tablets in godowns; 4 tablets in CAP, calculated as per stack capacity.
• ✔ The tablet releases phosphine gas and leaves ash.
• ✔ Fumigation duration is 7 days.
• ✔ Ash is collected, diluted in water, and removed.
• ✔ Used during heavy infestation.
• ✔ Each container contains 334 tablets.
• ✔ Reacts with water to produce phosphine gas.

• ✔ The size of the body of the machine should be Height 66” x Breadth 45” x Width 36”.
• ✔ The angles provided in the machine should be 65 x 65 x 6 mm M.S. angles.
• ✔ The paddy winnowing machine should have a minimum capacity of 4000 Kgs per hour (i.e., 100 bags of 40 Kgs per hour).
• ✔ The body of the cleaning chamber should be made of 14 gauge cold rolled sheets (2mm thickness) with size 35” x 40” x 30”, with an exhaust blower of 24” x 12” having three ports for retaining paddy during cleaning.
• ✔ The machine should be provided with a 2 HP ISI mark single-phase motor with 1440 RPM including switch.
• ✔ Drive Pulley size: 2.5” dia x 1 B ‘V’ pulley.
• ✔ Driven Pulley size: 4.5” dia x 1 B ‘V’ pulley.
• ✔ Suitable size of ‘V’ Belt should be provided.
• ✔ The entire machine should be spray painted with green colour emulsion painting.
• ✔ Input regulator should be fixed according to the required input.

• ✔ It is used in DPCs to clean / winnow the paddy at the time of purchase.